Learners will have the opportunity to learn and demonstrate skills, knowledge and competence of repairing damaged motor vehicle bodies and replacing panels.
Level 2
Industrial
106
1076
12 months = 6 months Foundation Program + 6 months Special Skills Training
Institute of the Motor Industry(UK) - Ministry of Manpower (Oman)
Total 16 Units Take the following:
This is an ESP course designed to meet the specific purposes of trainees serving in the automotive industry. This course adopts a theme based approach where the participants learn all four skills – Listening, Speaking, Reading and Writing and these skills get equal weightage. Four topics - most important and relevant to automotive industry have been selected for this course and the teaching of the four skills centers on them.
The Learner will:
NA
NCAT............................ 100%
Employer ...................... 0%
Mandatory
174
Classroom
Assignment, Test
2
Letter Grade
Foundation
The unit is designed to make the employee understand the moral benefits and importance of work and its inherent ability to strengthen character
The Learner will:
Non-Credited
NCAT............. 100%
Employer....... 0%
Mandatory
48
Classroom
Test
NA
Letter Grade
Industrial
This unit enables the learner to develop an understanding of routine maintenance and cleaning of the automotive environment, using resources economically and also the health, safety and welfare duties of everyone in the motor vehicle environment. It will provide an appreciation of significant risks in the automotive environment and how to identify and deal with them. Once completed the learner will be able to identify hazards and evaluate and reduce risk.
The Learner will:
10
NCAT.................. 33%
Employer ............ 67%
Mandatory
95
Classroom, Workshop
Practical Test, Written Exam
2
Letter Grade
Industrial
This unit enables the learner to develop an understanding of how to keep good working relationships with all colleagues in the automotive work environment by using effective communication and support skills.
The Learner will:
8
NCAT.................. 33%
Employer ............ 67%
Mandatory
60
Classroom
Practical Test, Written Exam
3
Letter Grade
Commercial
This unit enables the learner to develop an understanding of the correct selection, care and use of key hand tools and measuring devices for modification, fabrication and repair in the automotive environment, the correct preparation and use of common automotive environment equipment, the correct selection and fabrication of materials used when modifying and repairing and the correct application of automotive engineering fabrication and fitting principles
The Learner will:
11
NCAT ………75%
Employer ………25%
Mandatory
100
Classroom, workshop
Practical test and written test
2
Letter Grade
Industrial
This unit enables the learner to develop the knowledge and skills to carry out removal and fitting of non-permanently fixed vehicle panels such as wings, doors, bonnets, boot lids and tailgates. It also covers the evaluation of the operation of the components when fitted
The Learner will:
5
NCAT.................. 50%
Employer ...........50%
Mandatory
40
Classroom / Workshop
Practical exam 1,2 and 3 , written exam
2
Letter Grading
Industrial
This unit enables the learner to develop an understanding of carrying out removal and refitting of exterior panels using mechanical fastening, adhesive bonding, welding and joining techniques.
The Learner will:
11
NCAT.................. 50%
Employer ...........50%
Mandatory
90
Classroom / Workshop
Practical Exam 1 and 2, Written Exam
2
Letter Grading
Industrial
This unit enables the learner to develop an understanding of carrying out removal and refitting of exterior panels using mechanical fastening, adhesive bonding, welding and joining techniques.
The Learner will:
11
NCAT.................. 50%
Employer ...........50%
Mandatory
90
Classroom / Workshop
Practical exam 1,2 and 3, written exam
2
Letter Grading
Industrial
This unit enables the learner to develop an understanding of joining carbon steels using Metal Active Gas Shielding (MAGS) welding techniques .
The Learner will:
10
NCAT.................. 50%
Employer ...........50%
Mandatory
90
Classroom / Workshop
Practical exam 1 and 2, Written Exam
2
Letter Grading
Industrial
Unit RationaleThis unit enables the learner to develop the knowledge to join materials using resistance spot welding techniques and procedure.
The Learner will:
10
NCAT.................. 50%
Employer ...........50%
Mandatory
90
Classroom / Workshop
Practical exam 1-2, Written Exam
2
Letter Grade
Industrial
This unit enables the learner to develop an understanding of types of metals and composites used in the construction of motor vehicles, the areas where these materials are used and what their properties are. It is also about the design and construction techniques used in the vehicle body and chassis.
The Learner will:
2
NCAT.................. 100%
Mandatory
20
Classroom / Workshop
Written exam
2
Letter Grade
Industrial
This unit enables the learner to develop an understanding of carrying out a range of removal and fitting of mechanical, electrical and trim (MET) components to vehicles. It also covers the evaluation of the operation of the components when fitted
The Learner will:
4
NCAT.................. 50%
Employer ...........50%
Optional
40
Classroom / Workshop
Practical exam (1,2,3,4,5,6,7), Written Exam
2
Letter Grading
Industrial
This unit aims to broaden and develop candidates understanding of electrical principles to support their study of other units in the Level 2 National. The unit also introduces candidates to the principles of electronic science to support their studies of electronic components and systems found on modern vehicles. To promote interest and understanding calculations should be applied to motor vehicle applications wherever possible. Candidates should solve problems in each topic to develop their understanding of basic principles and gain confidence with solving electrical and electronic problems. The unit will provide a progression route to the Level 3 National Diploma
The Learner will:
6
NCAT.............100%
Employer ...... 0%
Mandatory
36
Classroom / Lab (Electronics, Physics/ Computer)
Assignment, Written test
2
Letter Grade
Industrial
This unit aims to broaden candidates understanding of mathematics to support their study of other units in the Level 2 extended diploma. To promote interest and understanding calculations should be applied to motor vehicle applications wherever possible. Candidates should solve problems in each topic, both with and without the use of calculators, to develop their understanding of basic principles and gain confidence with mathematical tasks. The unit will provide a progression route to Level 3 extended diploma.
The Learner will:
6
NCAT..................100%
Employer ...........0%
Mandatory
36
Classroom
Assignment
NA
Letter Grade
Industrial
This unit covers the main aspects of vehicle science required to support other units in the extended diplomas programme. The content covers aspects involving force, heat, linear motion, work and power. To promote interest and assist learning the content should be delivered in the context of motor vehicles and be related to the appropriate vehicle technology units of the technical certificate where possible. The unit will provide a progression route to the Level 3 extended diploma
The Learner will:
7
NCAT..................50%
Employer ......50%
Mandatory
36
Classroom, Lab (Electronics, Physics/ Computer)
Assignment 1,2,3,4
2
Letter Grade
Industrial
This unit aims to broaden candidates understanding of mathematics to support their study of other units in the Level 2 extended diploma. To promote interest and understanding calculations should be applied to motor vehicle applications wherever possible. Candidates should solve problems in each topic, both with and without the use of calculators, to develop their understanding of basic principles and gain confidence with mathematical tasks. The unit will provide a progression route to Level 3 extended diploma.
The Learner will:
6
NCAT.............100%
Employer ...... 0%
Mandatory
36
Classroom
Assignment
NA
Letter Grade
Industrial
300 OMR monthly
P. O. Box. 1555, PC. 132
Al Khoudh, Sultanate of Oman
Phone : 00968 24260500,
00968 24260573
Fax : 00968 24453272
Email : info@ncat.edu.om
Students Login
